You have a removed component with no legible markings, or a circuit isn't working as intended: place the component in the socket, and the device will show you its type and pin assignment; use the oscilloscope to see whether the signal is getting through.
- Identify components – The device identifies transistors, MOSFETs, diodes, thyristors, resistors, capacitors, and inductors, including their pin assignments. You don't need a datasheet, and you'll find out whether the component is defective.
- Oscilloscope with 2.5 MS/s and 200 kHz – View signals such as PWM or sensor data on the same device, without reaching for another tool.
- USB-C battery and stand – The manufacturer specifies up to 4 hours of continuous operation. The device sits on your workbench without a power cable.
- Important note – The included 1:1 probe measures up to ±40 V. For 230 V mains voltage, you need a 10:1 probe, available separately.
- Additional troubleshooting functions – PWM signal source (80 kHz, 5 V), IR decoder (NEC), continuity test, Zener diodes up to 24 V, and the DS18B20 and DHT11 sensors.
Suitable for repairs, DIY projects, and troubleshooting at the workbench.
Product details
| Device type | Transistor tester with oscilloscope function (2-in-1) |
| Model (as marked on the casing) | FNIRSI DSO-TC2 |
| Dimensions | 10 × 8 × 3 cm |
| Color | Yellow/Black |
| Sample rate | 2.5 MS/s (real-time) |
| Bandwidth | 200 kHz |
| Input impedance | 1 MΩ |
| Vertical sensitivity | 10 mV/Div – 10 V/Div (1-2-5 steps) |
| Max. signal voltage | 1:1 probe (included): 80 Vpp (±40 V); 10:1 probe (available separately): 800 Vpp (±400 V) |
| Signal source | PWM 80 kHz / 5.0 V, adjustable duty cycle |
| Recognized components | NPN/PNP transistors, N-/P-channel MOSFETs, junction FETs, diodes, dual diodes, thyristors, resistors, capacitors, inductors |
| Additional functions | Automatic pin assignment, IR decoder (NEC), continuity test, voltage measurement 0.01–16 V, Zener diodes 0.01–24 V, DS18B20 temperature sensor, DHT11 temperature/humidity sensor |
| Runtime | Up to 4 hours of continuous operation (manufacturer’s claim) |
| Setup | Fold-out stand, clamping base with locking lever |
| Package contents | 1 × meter, 1 × USB charging cable (USB-A to USB-C), 3 × test leads with alligator clips (green, black, red), 1 × BNC test cable with 2 alligator clips (1:1) |
| Not included | 10:1 probe (required for 230 V AC mains voltage), USB power adapter |