When reversing into a narrow space, the display shows you the distance to the obstacle in meters. You can tell in good time when to brake, so you no longer have to maneuver by feel.
- Digital display with color bars – The 9.8 cm-wide display shows the distance as a number and as a bar in green, yellow, and red. One glance is all it takes to see how much space is left.
- 4 ultrasonic sensors for the rear – Distribute the sensors across the width of the bumper, with the two outer sensors 12–20 cm from the edge of the vehicle. This means the system detects more than just the area directly behind the vehicle.
- Audible signal over 80 dB – The speaker in the display emits a clearly audible warning at a distance of 10 cm. You’ll hear when space is tight, even while looking over your shoulder.
- Automatic activation when reverse gear is engaged – Connect the system to the 12 V reversing light, and it switches itself on and off. No operation is required.
- Installation requires drilling – Drill four 22 mm-diameter holes in the rear bumper for the sensors. The hole saw attachment is included; you’ll need to provide the drill yourself. Front sensors are not included.
Suitable for tight underground parking garages, curbside parking spaces, and your own driveway.
Product details
| Package contents | 1 × control unit, 1 × LED digital display, 4 × sensors with cables, 1 × power cable, 1 × hole saw attachment |
| Not included | Drill; front sensors |
| Sensors | 4, 40 kHz ultrasonic, Ø 22 mm |
| Sensor color | Silver |
| Display | LED digital display in meters with green/yellow/red color bars, 9.8 × 1.9 cm, with speaker |
| Warning signal | over 80 dB at a distance of 10 cm |
| Power supply | 12 V DC (operating voltage 9–16 V) |
| Connection | Red to reversing light (+), black to ground |
| Activation | automatically when reverse gear is engaged |
| Sensor spacing (diagram) | Outer sensors 12–20 cm from the edge of the vehicle, with approx. 30 / 40 / 30 cm between them |
| Installation | Installation in the rear bumper; 4 holes with a diameter of Ø 22 mm required |
| Material | Plastic |